SUPER GLUE 3D FILLER, Blister 3g + 9g

• Ultra-strong 2-step super glue
• Set with special 3D filling granulate
• For instant, weld-like seams of adhesive
• Universal, gap-filling, material-moulding
• The super glue is sandable, drillable, and paintable

Ultra-strong liquid super glue with a special 3D filling granulate. Provides instantly a tough, weld-like seam of adhesive. Bonds all surfaces, fills gaps and cracks, strengthens connections, and moulds small broken-off parts. Can be sanded, drilled, and painted.

FIELD OF APPLICATION

Bonds, fills, strengthens, and moulds many plastics, porcelain, ceramics, glass, metal, wood, rubber, and much more. Not suitable for PE, PP, silicone resins, PTFE, and Styrofoam®.

APPLICATION

Position parts. 1. Apply the GRANULATE (No. 1) to one side (granulate height: max. 2mm). 2. Drizzle the ADHESIVE (No. 2) on the applied granulate; make sure to fully saturate it with adhesive. For deeper cracks or when more material is required repeat both steps as often as needed. For moulding small parts use baking paper as support and transparent tape as limitation. First use: To open the GRANULATE remove the cap and cut off the top section of the nozzle where indicated. To open the ADHESIVE turn the whole cap clockwise firmly onto the tube. Unscrew the top cap to reveal the applicator. After use: Clean nozzle of adhesive with a dry tissue and replace cap. Stains/residue: Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first). Advice: The best glueing results are reached at room temperature.